Rubber to Substrate Bonding Adhesives

Thixon 816-EF is a solvent-based, non-black, nonconductive covercoat adhesive for the vulcanization bonding of butyl rubber to Thixon primed metal.

Thixon 820-EF is a solvent based, conductive coating for Ethylene Propylene Terpolymer (EPT) rubber.

Thixon 823-0/66 is a nonconductive covercoat adhesive used with Thixon P-6-3 adhesive primer for bonding EPDM, and IIR compounds to metal during vulcanization.

Thixon 826-EF is a clear one-coat adhesive for bonding Santoprene to nylon. It can also be used for bonding EPDM to metal.

Thixon 907 is a specially formulated solvent blend to be used as the diluent for Thixon 405 and Thixon 423 adhesives.

Thixon 917 is a solvent blend especially formulated as a diluent for Thixon 416 and Thixon 422 adhesives.

Thixon 2000-EF bonds a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl, and nitrile.

Thixon 2001‐EF bonds a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl and nitrile

Thixon 6106 is an adhesive for bonding PVC to metal substrates including electrogalvanized, aluminum, and abraded stainless steel.

Thixon 6110 adhesive is used to thermally laminate polypropylene copolymers to substrates such as metal, glass and wood. Thixon 6110 series of adhesives are a one-part dispersion and must be mixed well before and during use. Cohesive failure bonds are typical for most polypropylene copolymer materials.

Thixon OSN-2-EF bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Hypalon 1 (CSM), Styrene Butadiene Rubber (SBR), Chloroprene (CR), and Polyacrylate (ACM).

Thixon OSN‐2‐S bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Hypalon1 (CSM), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM).

Thixon P-6-1D/66-EF bonds rubber to fibers such as rayon, polyester, and nylon. It can also be used as a one-coat cement for bonding natural rubber, styrene butadiene rubber and neoprene during vulcanization.

Thixon P-6-3 will bond various metals including hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals.

Thixon P-6-EF will bond various metals including hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals. It can also be used for bonding rubber to fibers such as rayon, polyester, and nylon.

Thixon P-11-EF is also used as a one coat for bonding nitrile rubber and polyacrylate compounds. Thixon P-11-EF will bond metal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals.

Thixon P-21 is a solvent-based primer, used in combination with Megum or Thixon cover coats. Thixon P-21 can also be used as a one-coat adhesive for the bonding of polar elastomers.

Thixon 511-EF is a vulcanizing covercoat adhesive used with Thixon P-11-EF adhesive primers for bonding natural rubber, SBR, EPDM, chloroprene, Hypalon1 , butyl, and nitrile rubbers.

Thixon 520-PEF is a general purpose cover-coat for bonding rubber compounds to metals and other rigid substrates during vulcanization.

Thixon 520‐EF is a covercoat adhesive used with Thixon adhesive primers for bonding NR, SBR, CR, IIR, and NBR compounds during vulcanization.

Thixon 531-EF is a covercoat adhesive used with Thixon P-11-EF adhesive primers for bonding NR, SBR, CR, IIR, and NBR compounds during vulcanization.

Thixon 532 AEF can be used with a primer to enhance metal adhesion and long term environmental resistance.

Thixon 532-EF is a vulcanizing covercoat adhesive used with Thixon P-11-EF adhesive primer for bonding most elastomers to various metals.

Thixon 547-EF is a covercoat adhesive that can be applied to all substrates which have been coated with a Thixon adhesive primer.

Thixon™ 550 is a covercoat adhesive used with Thixon adhesive primers for bonding NR, SBR, CR, IIR, and NBR compounds during vulcanization.

Thixon™ 560 is a cover coat adhesive used with Thixon adhesive primers for bonding EPDM, NR, HNBR, NBR, CR, IIR, and SBR compounds during vulcanization.

Thixon 715-1-EF/720 is a very economical one-coat, two-component vulcanizing adhesive for bonding nitrile, polyacrylate and polyurethane elastomers to metal.

Thixon 516-EF is a solvent-based vulcanizing cover-coat adhesive used with Thixon P-6-EF or Thixon P-11-EF adhesive primers for bonding NR, BR, IR, CSM, SBR, CR, IIR, HNBR, XNBR, NBR and EPDM compounds to metal during vulcanization.

Thixon 526 is a solvent-based general purpose cover coat adhesive for bonding rubber compounds to metals and other rigid substrates during vulcanization. Thixon 526 is typically used in conjunction with a Thixon or Megum™ primer.

Thixon 715-EF/Thixon 720 is a one-coat, twocomponent adhesive for bonding nitrile, polyacrylate and millable gum polyurethane elastomers to metal.

Thixon 715-EF+715-B is a translucent, two­component, one-coat agent recommended for the bonding of nitrile, polyacrylate, millable polyurethane and epichlorohydrin elastomers to metal.

Thixon 724-A is a one-coat vulcanizing adhesive for bonding nitrile elastomers to metal.

Thixon 803-1-EF is also a splice adhesive for bonding cured and uncured EPDM and IIR compounds to themselves and to other elastomers.

Thixon 812 is a coating material which can be applied to cured butyl or EPDM surfaces. When properly cured, this surface is conductive and extremely adherent to the substrate.

Thixon 814-1-EF is also a splice adhesive for bonding cured and uncured EPDM and IIR compounds to themselves and to other elastomers.
Thixon 814-1-EF is also a primer for EPDM rubber which is being coated with flock adhesives or coating.

Thixon 725-A+725-B is a red. translucent, two­component. one-coat agent recommended for the bonding of nltrlle, polyacrylate, millable polyurethane, eplchlorohydrin elastomers and PVC­NBR elastomer to metal.

Thixon 814-2 is also a splice adhesive for bonding cured and uncured EPDM and IIR compounds to themselves and to other elastomers.
Thixon 814-2 is also a primer for EPDM rubber which is being coated with flock adhesives or coating.

RoBond TR-7002 is a gray, waterborne one-coat adhesive for bonding NBR, HNBR, XNBR and polyacrylate to metal.

RoBond TR-7015-A is a high-performance waterborne one-coat adhesive for bonding peroxide-cured HNBR and EPDM to metal.

RoBond TR-7021-D is a waterborne seal adhesive for bonding NBR, HNBR and XNBR compounds.

RoBond TR-7053 is a one-coat water-based adhesive for bonding nitrile rubber (NBR) to various metals, nylon and engineering plastics.

RoBond TR‐7115 is a high‐performance waterborne one‐coat adhesive for bonding peroxide‐cured HNBR and EPDM to metal.

Thixon 300-EF/301-EF is a two component solventbased one-coat vulcanizing adhesive for bonding fluorocarbon elastomers to metal.

Thixon 304-EF is a solvent-based one-coat adhesive for bonding silicone compounds to metals during vulcanizing. Thixon 304-EF exhibits excellent resistance to high temperatures and oil.

Thixon 305 is a solvent-based one-coat adhesive for bonding silicone compounds to metal during vulcanizing.

The adhesion obtained with THIXON 309-71W shows excellent resistance to elevated temperatures, oil and chemical compounds.

Thixon 310-EF is a one-coat cement for bonding various silicone and fluoroelastomer compounds to metal during vulcanization. Exhibits excellent resistance to high temperature and oil environments.

Thixon 312-EF is a one-coat adhesive for bonding various silicone compounds to metals during vulcanization. Thixon 312-EF exhibits excellent resistance to high temperature and oil.

Thixon 403/404 bonds substrates such as metal, wood, nylon, particle board, plastics, epoxy, cement, sintered metals and alloys.

Thixon 412/415 bonds castable polyurethane to primed metal. It also bonds liquid castable polyurethane to previously cured cast urethane.

Thixon 420 is a one-coat adhesive for bonding thermoplastic polyurethane compounds to metal and other substrates.

Thixon 405 is a one-coat adhesive for bonding castable polyurethane compounds to metal and other substrates. Thixon 405 also bonds thermoplastic polyurethanes.

Thixon 423 can be used as a onecoat adhesive for bonding thermoplastic polyurethanes to metal. Thixon 423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds.

Thixon 422 is a one-component adhesive for bonding castable urethane to metal substrates. Thixon 422 has very good high temperature resistance.

Thixon 423™ can be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal. Thixon 423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester, and fiberglass compounds.

Thixon 423 can also be used as a onecoat adhesive for bonding thermoplastic polyurethanes to metal. Thixon 423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds.

Thixon 423 can also be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal. Thixon 423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds.

Mor-Flock 6008-A/6009-B bonds especially well to EPDM elastomers.

Mor-Flock 6017 Catalyst is recommended for use with Mor-Flock 6007 and Mor-Flock 6016.

Mor-Flock™ 6520 is a one-component adhesive for bonding polyester or nylon flock to TPV, TPE or corona treated EPDM compounds.

TP-759 plasticizer can be used successfully to develop optimum low temperature flexibility characteristics in fuel hose, automotive parts, wire jacketing and a wide variety of molded and extruded products.

Robond TR-100 can also be used as a one-coat adhes.lve for bonding some polar elastomers such as NBR or ACM.

Mor-Flock® 6520 is a one-component adhesive for bonding polyester or nylon flock to TPV, TPE or plasma or corona treated EPDM compounds. Thickener 9406 is used to adjust the viscosity of the Mor-Flock® 6520 to suit a specific flock process.

Mor-Flock 9737 & Thickener 9406 is a two component polyurethane emulsion in water, developed for applying polyester or polyamide flock fiber to PVC and PVC/EPDM extrusions. Mor-Flock 9737 contains a wetting agent to improve application.

TP-90B plasticizer is used to develop optimum low-temperature flexibility characteristics in fuel hose, wire jacketing, cellular rubber goods, friction compounds, and a wide variety of molded and extruded products.

TP-95 plasticizer can be used in vinyl resin formulations, either alone or in combination with other plasticizers. It is compatible with cellulose resins; such as ethyl cellulose, cellulose acetate propionate, and cellulose nitrate.

RoBond TR-2525 is a one-coat bonding agent for bonding heat-curable silicone compounds to metal and other solid materials under vulcanization conditions.

RoBond TR-3001 is an aqueous one-coat cement for bonding peroxide-cured EPDM insulation compounds to metallic substrates during vulcanization

RoBond TR-3002 may be used as an abrasion resistant cosmetic coating for nylon braid.

RoBond TR-3010 Is a waterbased, one-coat clear adhesive designed for bonding fluoro-elastomers.

RoBond TR‐3295 is a waterborne one‐coat adhesive for bonding fluorocarbon and acrylate compounds to metals and other solid materials under vulcanization conditions.

RoBond TR-5125 is a water-based adhesive that may be used with all Thixon™, RoBond and Megum™ water-based/solvent-based primers. RoBond TR-5125 can be used as a one-coat.

It is intended for bonding natural, SBR, butyl, nitrile, Polychloroprene and EPDM rubbers.

It is intended for bonding natural, SBR, neoprene and EPDM rubbers. This product has shown excellent resistance to mold fouling.

It is intended for bonding natural, SBR, neoprene and EPDM rubbers. This product has shown excellent resistance to mold fouling.

It is intended for bonding natural, SBR, neoprene and EPDM rubbers. This product has shown excellent resistance to mold fouling.

It is intended for bonding natural, SBR, neoprene and EPDM rubbers. This product has shown excellent resistance to mold fouling.

Megum 3290-1 ls suitable for all common curing systems including bisphenolic and peroxide curing.

Megum 3299 is particularly suitable for the bonding of peroxide cured fluoro‐carbon rubber.

Megum 3340-1 is a one-coat adhesive for bonding polar elastomers to metals and other rigid substrates during vulcanization.

Megum 3290‐1LD is suitable for all common curing systems including bisphenolic and peroxide curing. Megum 3290‐1LD gives an outstanding resistance to external influences and high temperatures, and may be used with all conventional vulcanization methods.

Megum 3911 can be used with any of the Megum, Thixon and Robond cover coat and one coat adhesives. It can be used to bond some nitrile compounds as a one coat adhesive.

This product is especially suitable for bonding both difficult to bond compounds and soft compounds.

This product is especially suitable for bonding both difficult to bond compounds and soft compounds.  MEGUM or THIXON adhesive primers are used to adhere to metals such as hot and cold rolled steel, stainless steel, aluminum and brass prior to applying MEGUM 5386.

Megum 5932 can be used with the Megum, Thixon or RoBond primers to enhance metal adhesion and long term environmental resistance.

Megum 10576 is a one-coat adhesive for the bonding of polar elastomers to metal and other rigid substrates during vulcanization.

Megum 15637 is a one-coat adhesive for the bonding of polar elastomers to metal and other rigid substrates during vulcanization.

Megum W 2525 is a waterborne, one‐coat clear adhesive designed for bonding elastomeric compounds based on FKM or fluoroelastomer, Co‐Polymer of Vamac®, Peroxide‐Cured EPDM, HNBR, NBR and Aflas®.

Megum W 2535 is also suitable for the bonding of peroxide cured EPDM, HNBR, NBR and AEM compounds.

Megum W 2535 is suitable for the bonding of peroxide cured EPDM, HNBR, NBR and AEM compounds.

Megum W 2010 LD is a water based, one-coat clear adhesive designed for bonding Fluoro-elastomers, Vamac® , and Polyacrylate elastomers to rigid substrate such steel, pre-treated steel and pre-treated thermoplastics.

Megum W‐7025 is a waterborne, one‐coat gray adhesive designed for bonding Nitrile, Hydrogenated‐ Nitrile, Vamac®, and Acrylic Rubber Sealing compounds.

Megum™ W-1111 is a high solids version of Megum W-1110 which was designed to be used for dipping and brushing applications, as well as spray applications.

Megum W‐3295 is a waterborne one‐coat adhesive for bonding fluorocarbon and acrylate compounds to metals and other solid materials under vulcanization conditions

Mor-Flock 6004/6005 bonds especially well to EPDM elastomers.

Mor-Flock 6008-A/6009-C bondsespecially well to EPDM elastomers.

This product is especially suitable for fast curing natural rubbers and rubber blends like NR/BR. Megum 122 J is typically used in conjunction with a Megum or Thixon primer.

The product is especially suitable for bonding both difficult to bond compounds and soft compounds.

Megum™ 508 can be used as a one‐coat bonding agent or as a covercoat over a primer such as Megum™ 3276 or Thixon™ P‐6‐EF. Megum™ 508 may be employed with all conventional vulcanization methods.

Megum 531 bonds a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl, and nitrile.

The product is especially suitable for bonding both difficult to bond compounds and soft compounds.

Megum 3110 can be used with cover coat or one coat adhesives. It can be used to bond some nitrile compounds as a one coat adhesive.

Megum 3270 is used as a one coat for bonding polar rubber compounds such as nitrile or
plychloroprene to metal or other materials. Megum 3270 will bond metal substrates including hot
and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals.

Megum 3276 is used as a one coat for bonding polar rubber compounds such as nitrile or plychloroprene to metal or other materials.  Megum 3276 will bond metal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc planted materials.